KISS Lajos, USUKI Seizo, GOTOU Humihiko:
Experimental verification of ultimate bending strength
of glulam-steel hybrid beam,
J. Structural Eng., JSCE, Vol.50A, pp.891-896, (2004).
H. Gotou, T. Kuwataka, T. Nishihara and T. Iwakuma: Finite Displacement Analysis Using Rotational Degrees of Freedom about Three Right-angled Axes, Computer Modeling in Engineering & Sciences, Vol. 4, No. 2, pp.319-328, (2003).
*
Humihiko GOTOU, Yukari SAKURAGI and Tetsuo IWAKUMA: Statistical Correlation between Quantificational Indices and Preference Judgements of Structural Landscapes, Forma, 17, pp.239-251, (2002).
*
Aoki, H. Tsunoda, T. Akiyama, H. Gotou, S. Nakamura: Dynamic chain reaction analysis of a cable-stayed bridge by sudden loss of stays considering cable corrosion,
Book, Life-Cycle of Structures and Infrastructure Systems,
Edition 1st Edition,
First Published 2023,
Imprint CRC Press,
Pages 8,
eBook ISBN 9781003323020.
*
対応する国際会議プロシーディングとしては、PROCEEDINGS OF THE EIGHTH INTERNATIONAL SYMPOSIUM ON LIFE-CYCLE CIVIL ENGINEERING (IALCCE 2023), 2-6 JULY, 2023, POLITECNICO DI MILANO, MILAN, ITALY , pp3062-3069, 2023.
Daisuke Oikawa, Shuya Nemoto, Humihiko Gotou, Yukari Aoki:
ESTIMATION METHOD OF DEGRADATION STATE FOR TIMBER BRIDGES USING VIBRATION ANALYSIS,
p. 2350-2355,
World Conference on Timber Engineering (WCTE 2023),
2023, Oslo, Norway.
DOI:
https://doi.org/10.52202/069179-0311
Tomohumi Huzita, Humihiko Gotou, Takanobu Sasaki, Ryu Noda:
Construction Examples of On-Site Timber Stress-Laminated Box-Beam Bridges，World Conference on Timber Engineering (WCTE2018, SEOUL), 2018/8.
Ryu Noda, Tomohumi Huzita, Humihiko Gotou:
Development of Deterioration Diagnosis Method Combining Load Measuring Device and Driver Pin,
World Conference on Timber Engineering (WCTE2018, SEOUL), 2018/8.
Humihiko GOTOU, Takanobu SASAKI, Seizou USUKI, Ryuichi ABE,
Duy Hai BUI:
NEW TYPE HYBRID BRIDGES UTILIZING STRESS-LAMINATED DECKS AND STEEL MEMBERS,
WCTE 2012 Final Proceedings,
SESSION 45, DESIGN 15, p.564-571,
2012
(USB Memory Stick).
WCTE12 Final Paper Journal Wednesday - Architexture and engineering case studies.pdf
WCTE 2012,
World Conference on
Timber Engineering -
New Zealand,
15-19 July 2012
(国際会議、口頭)
Tomohiro Chida, Humihiko Gotou, Hidefumi Yamauchi, Takanobu Sasaki,
Yasuo Okazaki, Yasuo Kawai and Yasuo Iijima:
THE FUNDAMENTAL STUDY OF THE PROPOSAL OF SHEAR
FAILURE TEST METHOD AND ESTIMATION OF PURE SHEAR
STRENGTH OF JAPANESE CEDAR,
WCTE 2012 Final Proceedings,
TIMBER ENGINEERING CHALLENGES AND SOLUTIONS, p.173-178,
2012.
WCTE12 Final Paper Journal Poster Presentations.pdf
WCTE 2012,
World Conference on
Timber Engineering -
New Zealand,
15-19 July 2012
(国際会議、第一著者の代理でポスター発表)
Humihiko GOTOU, Masahide DAIKOKUYA, Takanobu SASAKI, Kaoru HASEBE:
SHEAR CHARACTERISTICS OF STEEL-PLATE-INSERTED GLULAM
BEAMS,
WCTE 2010, Conference Proceedings,
11th World Conference on
Timber Engineering, 2010
(CD-ROM).
WCTE 2010,
11th World Conference on
Timber Engineering -
Riva del Garda, Trentino, Italy,
June 20-24, 2010
(国際会議、口頭)
CHIDA Tomohiro, SASAKI Takanobu, GOTOU Humihiko, USUKI Seizo, SHINOHARA Yoshinori, TOYODA Atsushi:
PROPOSAL OF A SQUARE STEEL TUBE-TIMBER HYBRID BRIDGE AND THE TECHNOLOGIES USED FOR IT,
WCTE 2010, Conference Proceedings,
11th World Conference on
Timber Engineering, 2010
(CD-ROM).
WCTE 2010,
11th World Conference on
Timber Engineering -
Riva del Garda, Trentino, Italy,
June 20-24, 2010
(国際会議、ポスター)
GOTOU Humihiko, DAIKOKUYA Masahide, CHIDA Tomohiro, USUKI Seizo:
Estimation of shear modulus by FEM bending simulation of
steel-plate-inserted glulam wood beams,
WCTE 2008, Conference Proceedings,
10th World Conference on
Timber Engineering, 2008
(CD-ROM).
WCTE 2008,
10th World Conference on
Timber Engineering - Miyazaki, JAPAN, June 2-5, 2008,
Program and Abstracts, p.310.
(国際会議、口頭)
Tomohiro Chida, Humihiko Gotou, Seizo Usuki, Atusi Toyoda,
Takanobu Sasaki:
ELASTO-PLASTIC SHEAR BEHAVIOR OF STEEL-INSERTED GLULAM-BEAMS,
International Conference on Steel, Space & Composite Structures;
20071010-12, 14-15; Yantai, Beijing(CN)*.
(国際会議だが、都合により不参加)
GOTOU Humihiko, CHIDA Tomohiro, USUKI Seizo:
Estimation of shear modulus by FEM bending simulation of wood beams,
WCTE 2006, Conference Proceedings,
9th World Conference on
Timber Engineering, 2006
(CD-ROM).
*
WCTE 2006,
9th World Conference on
Timber Engineering - Portland, OR, USA-August 6-10, 2006,
Program and Abstracts, p.252.
(国際会議、口頭)
Humihiko Gotou, Takashi Kuwataka, Tetsuo Iwakuma:
Spacial Beam Analysis using Rotation Group and Rotational Angles
about Three Axes,
Advances in
Computational Engineering & Sciences, Vol. 1,
837-842, (2000).
Special Symposia, Finite Rotations in Structural Mechanics,
2000 / 8 / 21 - 25, Los Angeles, CA, USA.（国際会議、口頭）
